China tie wire anchors wholesale customized
- NEWSTARWDH
- CHINA
- 7-35 DAYS
- 1000 TONS
Material: Carbon Steel, Alloy Steel, Stainless Steel
Measurement system: INCH, Metric
Size: M6 - M20 , 1/4'' - 3/4''
Thread: M, UNC, UNF
Finish: Black Oxide, Zinc Plated(Clear/Blue/Yellow/Black),H.D.G , Y.Z.P ,Plain, Nickel, Chrome.
Tie Wire Anchors
Material: Carbon Steel, Alloy Steel, Stainless Steel
Measurement system: INCH, Metric
Size: M6 - M20 , 1/4'' - 3/4''
Thread: M, UNC, UNF
Finish: Black Oxide, Zinc Plated(Clear/Blue/Yellow/Black),H.D.G , Y.Z.P ,Plain, Nickel, Chrome.
Description
Product name | Tie Wire Anchors |
Place of origin | China(Mainland) |
Brand Name | NEWSTARWDH |
Port | Qingdao or according to requirement |
Delivery time | Normally in 7-35 days, according to quantity |
MOQ | 500kgs for each specification |
Mark | According to customer’s requirement |
OEM | Available |
The tie wire anchors installation steps are as follows:
(1) According to the design requirements, combined with the actual situation of the site, and the verification is correct, determine the installation position of the anchor bolt.
(2) Drill holes according to the design requirements of the hole diameter and depth. The drill bit should be perpendicular to the main body mounting surface.
(3) Clean the holes with a blow pump, brush or air compressor.
(4) Put the drug tube into the hole and push it to the bottom of the hole.
(5) Connect the anchor bolt to the electric drill through the installation tool. Use the anchor bolt to press the medicine tube in the hole, and start the electric drill to push the anchor bolt to the installation depth.
Tie wire anchors drilling operation points:
According to the design requirements, according to the paper spacing (the distance between the adjacent anchor axes), the margin (distance from the anchor axis to the free edge of the member), the hole is drilled on the substrate, according to the design bolt type, according to the bolt The installation parameter table determines the hole diameter and hole depth. The bolt type and size determine the required drilling depth. With a few exceptions, it is generally larger than the anchoring depth (the distance from the anchoring foundation surface to the bottom end of the screw is the bearing capacity). Important parameters).
The choice of screw type is to meet the anchor thickness requirement, and the anchor thickness is equal to the thickness of the anchored object (including the thickness of the decorative layer).
Clear the hole: blow the pipe with air pressure, remove the dust from the hole, and keep the hole clean.
Insert the drug tube: Insert the drug tube into the clean hole. When inserting, ensure that the resin can flow like honey under hand temperature conditions before using the drug tube.
Drilling the bolt: Screw the screw into the screw until the medicament flows out. The electric drill uses the matching electric drill provided by the manufacturer (with the dual function of drilling and screwing in the screw), and the drilling speed is 750n/min. The bolt is screwed in, the drug tube is broken, and the resin is used. The curing agent mixes with the quartz particles and fills the pores between the anchor and the pore walls. When the drug tube is inserted into a clean, wet hole, the water in the hole must be drained, but the waiting time for the gel process and the hardening process must be doubled.
Gel process: Keep the installation tool intact. The chemical reaction time is not lower than the relevant time. Remove the installation tool and wait for the agent to harden. (The hardening time is not lower than the relevant time requirement.)
Fixed object: After the agent is completely hardened, add a washer and a hex nut to fix the object.
Packaging Details:
A. Bulk in cartons(≤25KG)on wood pallet 36CTN/wood Pallet
B. Box + Carton + wood pallet , carton≤ 18kg , 48CTN/wood Pallet
C. According to customer special demand.
