Hex head self-tapping screw installation method and function
What is the method when installing the hex head self-tapping screws? Where can the hex head screws be applied? Let's take a look at the installation method and function of the hexagonal self-tapping screws. I hope to help everyone.
Hex head self-tapping screw installation method
1. Use a manual screwdriver to select the appropriate screwdriver according to the shape of the groove of the hexagonal self-tapping screw. Align the opening of the screwdriver with the shape of the groove of the screw. You want to connect and tighten the screw. Squeeze the screw directly and turn the screwdriver in your hand clockwise. Rotate the hex head tapping screw little by little into the workpiece until the entire screw thread is immersed in the workpiece.
2. The use of power tools makes the installation of hexagonal self-tapping screws more convenient and easier. It works like a manual screwdriver. However, the use of an electric screwdriver makes it quicker and easier to install the hex head tapping screws.
The role of Hex head self-tapping screws
1. Hexagon head self-tapping screws are used for the connection between gypsum wallboard and metal keel. The thread is double-headed thread, and the thread surface also has high hardness. It can be quickly screwed without prefabricating holes. Into the keel, forming a connection.
2. Hex head self-tapping screws are also used for the connection between thin metal plates. The thread is a common thread with a curved triangular cross section. The thread surface also has a high hardness, so the screw can also be connected when connected. The internal thread is tapped in the threaded bottom hole of the connector to form a connection.
3. The difference between the hex head tapping screw and the ordinary self-tapping screw is that the ordinary self-tapping screw must pass through two steps of drilling and tapping when connecting, and the self-tapping screw from the hexagonal head will be drilled when connected. The two processes of tapping and tapping are combined once.
The above is about the installation method and function of the hexagonal self-tapping screws. I hope everyone can understand the installation method and function of the hexagonal self-tapping screws.
